Airworthiness Directive · Amendment 39-12211 · Cessna Aircraft Company Models 206H and T206H Airplanes
Cessna Aircraft Company Models 206H and T206H Airplanes
The Federal Register printed this AD without its applicability text. Read it at the link below.
<RM>This amendment adopts a new airworthiness directive (AD) that applies to certain Cessna Aircraft Company (Cessna) Models 206H and T206H airplanes. This AD requires you to visually inspect the horizontal stabilizer attachment reinforcement brackets for the existence of seam welds and replace any reinforcement bracket found without seam welds. This AD is the result of a report that these parts were manufactured without seam welds. The actions specified by this AD are intended to detect and replace structurally deficient horizontal stabilizer attachment brackets. Continued use of such brackets could result in structural failure of the horizontal stabilizer with reduced or loss of control of the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
Aircraft
