Airworthiness Directive · Amendment 39-11796 · Rolls-Royce Ltd. Dart 511, 511-7E, 514-7, 528, 528-7E, 529-7E, 532-7, 532-7L, 532-7N, 532-7P, 532-7R, 535-7R, 551-7R, and 552-7R Turboprop Engines
Rolls-Royce Ltd. Dart 511, 511-7E, 514-7, 528, 528-7E, 529-7E, 532-7, 532-7L, 532-7N, 532-7P, 532-7R, 535-7R, 551-7R, and 552-7R Turboprop Engines
This AD is applicable to Rolls-Royce Ltd. (R-R) Dart 511, 511-7E, 514-7, 528, 528-7E, 529-7E, 532-7, 532-7L, 532-7N, 532-7P, 532-7R, 535-7R, 551-7R, and 552-7R turboprop engines. These engines are installed on but not limited to Fokker Aircraft B.V. F27 series and Maryland Air Industries (formerly Fairchild) F-27 and FH-227 series airplanes.
This amendment adopts a new airworthiness directive (AD), applicable to Rolls-Royce Ltd. Dart 511, 511-7E, 514-7, 528, 528-7E, 529-7E, 532-7, 532-7L, 532-7N, 532-7P, 532-7R, 535-7R, 551-7R, and 552- 7R turboprop engines. This AD requires the installation of a feathering probe and a steel retaining ring in the reduction gear housing (RGH) and replacement of a transfer bobbin installed in the torquemeter. This amendment is prompted by two reports of the failure of a propeller to feather following the failure of the RGH annulus gear, which resulted in the propeller overspeeding and the release of a propeller blade, causing damage to the airplane. The actions specified by this AD are intended to prevent a propeller from overspeeding and the release of a propeller blade after a failure of the RGH annulus gear, which could result in damage to an adjacent engine or to the airplane.
The aircraft, engines and makers this AD names, by the model designations in its text. A model listed here may still be outside the AD's serial ranges.
