# Run a work order

> Open a job when an owner calls or taxis up, record who pays and what they asked for, add the labor and parts, and raise the invoice when the aircraft goes home.

Source: https://www.aerscheduler.com/docs/maintenance/run-a-work-order
Section: Maintenance and squawks. For: Owners, Admins, Technicians.

`Maintenance → Open jobs → Open a work order` (web console). Pick the aircraft, check
who pays, write down what the owner asked for, and click **Open work order**. The job gets the
next number (WO-1001, WO-1002 and so on) and its own page, where you move it through its stages
until the aircraft goes home.

**Who can do this:** Owners, Admins, Technicians

A work order is one job on one aircraft: who is billed, when it came in and when you promised
it back, what the owner asked for, and where the job stands. Only owners, admins and technicians
see work orders. Dispatchers see customer aircraft on the schedule and the hangar bookings, but
not the jobs, and pilots never do, not even on your own aircraft, because a job carries the
owner's details and prices.

## Open a work order

1. **Start from the board or the aircraft**

   `Maintenance → Open jobs → Open a work order` (web console), the **+** in the top bar
   from any page, or open the aircraft and go to `Work orders → Open a work order` (web console). From the aircraft, the tail is already chosen.

2. **Pick the aircraft, or add it**

   Search the tail. A customer's aircraft that is not on file yet is added from here: type the
   tail and choose **Add a customer aircraft** at the bottom of the list. The tail you typed is
   filled in, and once you save it the job picks it. Only admins add aircraft.

3. **Check who pays**

   **Billed to** fills itself in with the aircraft's owner marked **Billed** on its **Owners**
   panel. One person pays for each job: co-owners are not billed. Choose **Nobody** for your
   own aircraft. You can change it later, until the job is invoiced. Only an admin chooses who
   pays; a job a technician opens goes to the aircraft's owner.

4. **Pick the stage**

   **Requested** when the owner has asked for the work but no day is agreed, **Scheduled** when a
   day is agreed for it to come in, **Aircraft received** when it is in the hangar. Each stage
   says what it means in the menu. Before the aircraft arrives there are no meters to record, so
   the form does not ask. Choosing **Aircraft received** fills in the Hobbs and tach in from the
   aircraft; correct them if the meters say something different. On a customer's aircraft,
   a job opened at **Scheduled** or later, or with a **Promised back** date, emails the owners
   straight away, at the address you recorded if they have not signed up. Try your first job on one of your own aircraft, which has
   no owner to email.

5. **Write down what they asked for**

   In the owner's words: "Annual inspection. Left brake feels soft." Add **Promised back** if you
   gave them a day, and assign the technicians doing the work. Only people with the technician
   role are listed: give an admin who does the work that role too.

6. **Click Open work order**

   You land on the job's own page.

## When an owner asks for work

An aircraft owner who has signed in can ask for work on their aircraft from their own page.
The request opens a job by itself at **Requested**, billed to the aircraft's billed owner, and
it waits under **Requested** on `Maintenance → Open jobs` (web console). Nobody on the
owner's side is emailed about a Requested job; the owner sees it on their page.

What they sent is on the job:

- **What the owner asked for** is their request in their words, ending with the day they would
  like it back ("Wanted back by Thu, Oct 15"). **Promised back** stays yours to set.
- Under it: whether they say it is **Grounded**, when it **Can come in** (a day, or from one day
  to another), **Where it is**, and the **Times given** for Hobbs and tach. Those times also go on
  the aircraft's meter log, linked to the job.
- Their photos and documents, up to five, are under **Files and photos**, shown to the owner.

Who is told: everybody whose **New requests** switch is on, in the bell, by email and by push.
It starts on for technicians and off for admins, who turn it on if they want it; in an
organization with no technicians signed in, it starts on for admins too. Each person changes it
under **Maintenance shop** in their notification settings. See
[Notifications and emails](https://www.aerscheduler.com/docs/getting-started/notifications-and-emails).

1. **Put a technician on it**

   Open the job and click **Technicians** under **Details**. Each technician you add is told.

2. **Book the hangar time**

   When you have agreed a day with the owner, make a Maintenance booking for the aircraft on the
   schedule and choose this job in its **Work order** field. If the booking already exists,
   pick it under **Booked for** on the job instead. See
   [Book an aircraft in for maintenance](https://www.aerscheduler.com/docs/maintenance/book-an-aircraft-in-for-maintenance).

3. **Move it to Scheduled**

   Every owner of the aircraft is told it is booked in, with the day to bring it in when the
   job holds a booking. Set **Promised back** if you gave them a day; they are told that too.

4. **Receive it**

   When the aircraft arrives, move the job to **Aircraft received** and check the Hobbs and tach
   in.

If you are not taking the job, set it to **Cancelled** and tell the owner yourself: nobody is
emailed about a cancelled job.

## Move the job along

On the job's page, the **Stage** menu at the top moves it: Requested, Scheduled, Aircraft
received, In progress, Waiting for owner, Waiting for parts, Ready for pickup, Completed, or
Cancelled. The dates follow the stage: the first stage that means the aircraft is here records
when it was **received**, **Completed** records when the work finished, and **Completed** or
**Cancelled** moves the job to **Finished jobs** with that day. Moving a finished job back to an
open stage puts it back on the board. Moving a job back to **Requested** or **Scheduled** clears
the received date, so the day the aircraft really arrives is the one recorded. The Hobbs and tach
readings stay on the job: a stage move never clears them, and never changes the aircraft's own
times. Change them under **Details** if they are wrong.

When a job moves to **Aircraft received** (or straight to a later stage in the hangar) with no
Hobbs or tach in recorded, the meters open under **Details** with them filled in from the
aircraft. Check them against the meters and click **Save**, or **Cancel** to leave them empty.
When it moves to **Ready for pickup** or **Completed** with no Hobbs or tach out, the meters open
again for the readings out, the aircraft's return to service.

If a customer's aircraft has no Hobbs meter (or no tach) and was added as having both, an admin
clicks **This aircraft has no Hobbs meter** under the readings (on the phone, **No Hobbs meter**
in the meters sheet). The aircraft is recorded as tach only from then on, here and on every later
job, and a 0.0 typed for the missing meter comes off the job. Never type 0.0 for a meter the
aircraft does not have: it goes on the aircraft's meter log as a reading.

### Completing a job that is not invoiced

Moving a job somebody pays for to **Completed** while it has charges on it and no invoice asks
first, because a finished job that was never billed is easy to lose.

- **Raise the invoice** opens the invoice; the job completes once it is sent.
- **Complete without an invoice** is for a job you are not billing: a staff member's own
  aircraft, a warranty job. The job reads **Not billed**, and the **Billing** card says so, with
  **Bill it after all** to change your mind.
- On the phone, where invoices are not raised, the choices are **Complete, invoice later** and,
  for an admin, **Not billing it**. A technician's **Complete anyway** completes it too.

A completed job with charges and no invoice, that nobody said not to bill, reads **Not invoiced**
on the job, on **Finished jobs**, and on the phone's **Finished** list, until somebody raises the
invoice (the **Billing** card has the button) or clicks **Not billing it**. Reopening a job clears
**Not billed**, so completing it again asks again.

Moving a job to **Ready for pickup** or **Completed** while an inspection on it is not signed off
(and the owner did not decline or put it off) asks first. Sign it off, or choose **Complete
anyway**: while the job is open the owner hears nothing about that inspection, and once it is
finished they start getting its reminders.

> **Note:** A reading lower than the one the aircraft last had, or a Hobbs or tach out lower than in, asks
> you to check it before it saves. Save it as a correction only if that is what the meters say, for
> example after a meter was replaced. A reading that would bring another inspection due and ground
> the aircraft asks too, before anything is saved.

There is no Edit button: each detail is changed where it is shown. Click a value under
**Details** to change it: **Billed to**, **Promised back**, **Technicians**, the **Hobbs** and
**tach** in and out, and **Booked for**, the maintenance booking on the schedule that holds the
aircraft and the hangar for the job (choose **Not booked** when it has none). It works from the
other side too: a maintenance booking has a **Work order** field that links an open job or
opens a new one with its technicians. Click the
pencil on a notes card to write in it, then **Save** (or Cmd+Enter); Esc puts it back. **What the
owner asked for** is the request in their words, **Notes for the owner** are what you would tell
them, and **Shop notes** are for the shop only.

> **Note:** The Hobbs and tach in and out on a job are the aircraft's readings too. Each one you save goes on
> the aircraft's meter log, marked **Arrival** or **Return to service** with the job's number, and
> moves the aircraft's own times, so hour-based inspections and the owner's "times last read" stay
> current without typing the same reading twice. A reading dated before the aircraft's newest one
> (an arrival entered after a later reading) is kept in the log and leaves the aircraft's times as
> they are.

## The work on the job

The job's page keeps the work and what it charges in one list, **Work and charges**. What the
owner asked for and what you found are separate groups, because they are different conversations
with the owner, and each item has the labor and parts done for it listed underneath, with its
total. Click **Add** and choose **Owner's request** or **Finding**, or type to search the menu.
Hover a group's header and click its **+** to add straight into that group: an owner's request,
a finding, or a charge not for any item.

- **Each item's ring says where it stands:** a green tick when it is done, a blue dot when the
  owner approved it, a dashed ring when the owner has not answered yet, a half-filled ring while
  its inspection or squawk is open.

- **Fold** a group or an item by clicking it. With the keyboard, the arrow keys move down the
  list, Enter opens a line, and Left and Right fold an item.

- **Attach an inspection or a squawk** that is open on this aircraft, and the item is done when it
  is signed off or resolved, whether that happens here or on the phone. Its **Sign off** or
  **Resolve** button opens the same form as everywhere else, so the next due date is worked out
  as it always is.

- **A plain item** (a brake adjustment, a wash) you tick done yourself.

- A found item you have not sent to the owner says **Not sent yet**; once sent it says **Sent,
  waiting** until they answer. Click that tag to record an answer you took on the phone straight
  from the list: **Approved**, **Declined** or **Deferred**, or **Record a call with notes…** for
  the full record below. A finding done before anybody answered says **Done, not asked**, or
  **Done, no answer** if it had been sent.

- **Rewording a finding the owner was asked about asks again.** Their answer was for the old
  words, so it is cleared and the finding reads **Not sent yet**: send it again. A finding not
  sent yet, an owner's request, or a finding already done rewords freely. On a job that is
  invoiced or closed nothing can be asked again, so rewording only corrects the words and the
  owner's answer stands, as the bill does.

- **On your organization's own aircraft** there is no owner to ask, so a finding is simply work
  to do: it has no answer tag. To decide not to do one, or to do it later, use its **⋯** menu,
  **Not doing it** or **Later**; its lines then stay on the job, not billed, and **Doing it after
  all** puts it back.

- An item's **⋯** menu adds labor or a part for it, marks it done, renames it or removes it. A
  finding you never sent that still has charges on it cannot be removed: its lines would stay on
  the bill for something the owner never heard of. Take its lines off first, or send it.

## Send findings to the owner

When you have written up what you found, and priced it if you can, click **Send to owner** at the
top of **Work and charges**. Every owner of the aircraft is told in one message and asked to
approve, decline or put off each finding. Prices and the total go only to the person the job is
billed to.

- **Until you send a finding, the owners do not see it.** Write it up and price it first; send
  when it is ready. Adding a finding to an open job that is not invoiced also offers **Notify
  owner** in the message that confirms it, for when it is ready as it stands; it sends every
  finding not sent yet.
- **Only what is new is sent.** Findings already sent, answered or done are left out, so pressing
  it again later sends just the ones added since.
- **A job opened while you set up your shop starts with owner emails held.** The line at the top
  of the job says so; **Tell the owner** sends the owner where the job stands (booked in, arrived
  or ready), and sending findings releases the hold too. From then on the owners hear each stage
  as usual.
- **The job moves to Waiting for owner** if it was at Aircraft received or In progress, and back
  to In progress by itself once every finding sent has an answer or is done: the owner answers in
  AerScheduler, you record their call, you tick it done, or you sign off its inspection or
  resolve its squawk (here or on the phone). Only answering or finishing a finding that was
  waiting moves it back: a job you set to **Waiting for owner** yourself, for something else,
  stays there. Unticking a finding sent and not answered moves the job back to Waiting for owner.
- **Only on a customer's aircraft.** On your organization's own aircraft there is no owner to
  send to or call. The tag on a finding reads **Not decided**, and its menu, **Decision**, records
  your choice under your name. **Record owner's answer** and the **Owner's answers** card are not
  shown.
- **An owner who has not signed up** is emailed at the address on the aircraft, with a way to
  sign up and answer. One with no address is listed as not reached.
- **Hover over Send to owner to see who it asks.** When nobody can be reached, the button is
  turned off and the same card says why and what to do: add an owner or an email address on the
  aircraft's **Owners** panel, or call the owner and click **Record owner's answer**. If you own
  the aircraft yourself, there is nobody else to ask: decide the findings with **Record owner's
  answer**. **Notify owner** is not offered in those cases either.

## Record the owner's answer

When you have spoken to the owner, click **Record owner's answer**, beside **Add** at the top of
**Work and charges**. Put who you spoke to, when,
the most they said you can spend without calling again, and notes. Then choose **Approve**,
**Decline** or **Defer** for each item you discussed. Only the items you answer are changed, and
an item answered again on a later call shows the later answer.

Leave **When** as it is and the call is recorded at the moment you save it. Change it to write up
an earlier call: if the owner answered an item later than that (on another call, or themselves in
AerScheduler), their later answer stands, and the message after saving says which items kept it.

Once the job is invoiced, its answers are the bill's too. Each finding's tag shows its answer but
no longer opens, **Record owner's answer** is gone, and the top of **Work and charges** says
**Invoiced: void the invoice to change the work.** The same holds on a closed job: reopen it
first.

> **Note:** An owner who has signed in can answer what you sent them themselves, until the job is invoiced,
> and the technicians on the job are told when they do. When they call instead, this is
> your record of the call: who you spoke to, when, what they agreed to, and who took the call. Every
> answer is listed under **Owner's answers** on the job.

## Photos and documents

**Files and photos** on the job keeps the pictures and the paperwork: the crack you found, the
logbook entry, the 8130-3 for a part. Click **Attach** and choose up to five photos or PDFs at
a time. To put a photo on one finding, use that item's menu, **Attach a photo or file**; the
item's row shows how many it has.

Every file is the shop's own until you choose **Show to the owner** from its menu (and **Keep
to the shop** puts it back). Its menu also moves it onto a different item or the job itself,
and removes it. Files can still be added after the job is invoiced, since the logbook entry
is often the last thing that happens.

## Labor and parts

The lines are everything the job will charge. Anyone in the shop adds lines as the work is done:
a technician enters their own hours and the parts they fitted. Click **Add** and choose the kind
under **Charges**, or use an item's menu, **Add labor or a part for it**, to add a line already
under that item. Click a line to change it.

The form asks only for what the line is: what was done, and its hours and rate or its quantity
and price. Everything else is a row of buttons under it, each showing its value, and a line that
keeps the usual values never needs them: the **kind**, the **item** it is for, the
**technician** and **day** (labor), the part's **status** and **expected** date, a **discount**,
**sales tax**, and whether it is **billed**. Click one to change it.

> **Note:** Only an admin prices. Technicians enter work at the job's rates (see
> [Rates for a customer or a job](https://www.aerscheduler.com/docs/maintenance/run-a-work-order#rates-for-a-customer-or-a-job)): their labor takes the job's
> labor rate and their parts and outside work its markup, on the console and on the phone alike. They type a
> price only on Shop supplies, Freight, Fee and Other lines. An admin changes a line's rate,
> markup, price or kind, decides its tax and whether it is billed, and changes lines somebody
> else entered. Everyone else changes only the lines they entered, and a line an admin prices
> becomes the admin's. An admin sees every line in the invoice preview before raising it.

- **Labor** is hours at a rate. Type clock time: 1.5 is an hour and a half, 0.25 a quarter.
  **Rate per hour** fills in from the job's labor rate, which says under it whose it is (the
  shop's, the customer's, or the job's own); an admin can change it on the entry. Until there is
  a labor rate, only an admin can enter labor. The **Technician** starts as the job's technician
  when it has one (on the phone, you, when you are a technician); pick who did the work and the
  **Day** it was done.
- **Part** and **Outside work** are what the shop paid (**Cost each**) plus the shop's markup for
  that kind. **Price each** shows the result, greyed, and says the markup under it. An admin can
  type a price there to charge that instead; empty the field to go back to cost plus the markup.
  A part also takes its part number, serial number and vendor, and a status (ordered, received,
  installed, returned, unused) with the day it was ordered and the day it is expected.
- **Shop supplies**, **Freight and shipping**, **Fee** and **Other** are a quantity at a price.
- **Discount** takes a percentage off a whole line: 10 takes 10% off. Only an admin gives one. The
  card and the invoice show the line at its discounted price, with "(10% off)" in its name, and a
  line 100% off stays on the invoice at $0.00 so the owner sees the work you gave them.

Each line can point at one of the job's items with **For item**, and the list shows it under that
item, so you can check the charges against the work the owner approved. A line for no item, or
for an item since removed, is listed under **Not for a specific item**.

- **Billed** is the default. Choose **No charge** for warranty work or shop time you are not
  billing: the line stays on the job as a record of the work, and never reaches the invoice.
- **Sales tax** follows your organization's rule for that kind of line. Choose **Taxable** or **Not
  taxable** on a line to decide it yourself. A taxable line needs a sales tax rate to charge it
  at: until your organization has one, the line form says so with a link to set it, and
  **Raise invoice** is turned off, with the reason when you hover over it. See
  [Charge sales tax](https://www.aerscheduler.com/docs/billing/charge-sales-tax) for the rules.
- **What the owner declined or put off is not billed.** Its lines stay on the job, struck through
  and marked **Not billed**, and are left out of the total and off the invoice. That goes for
  what the owner asked for as much as for what you found. To bill one after all, record their new
  answer for it.

> **Note:** The customer never sees your cost or your markup. The invoice shows the price each and the
> total, with the part number and "(4 x $12.50)" in the line's name when there is more than one.
> All of a job's labor lines stay separate, each saying its hours, and its rate when the line is
> charged at that rate.

## Raise the invoice

**Who can do this:** Owners, Admins

When the work is done, click **Raise invoice** at the bottom of **Work and charges**, beside the
total. The dialog prices
the bill exactly as it will be raised: each line with its tax, your service fee, and the total.
Under **Also on the invoice** it shows what the bill carries besides the lines: the work order
number, the aircraft (tail, make and model), the Hobbs and tach in and out, and a description
listing the work completed (the items marked done that the owner did not decline) followed by
your **Notes for the owner**. Your notes always keep their room: a long list of finished work ends
"and 3 more", and the dialog says when anything was shortened. Pick when it is **Due**: on
receipt, in 15 or 30 days, or **On a date…** to pick the day on a calendar (up to a year out; it
is due at the end of that day). Then click the button that names the total. The person billed
gets it by email with a link to pay online: an owner who is not a member
of your organization gets Stripe's email
at the address on the aircraft's **Owners** panel, and a member gets it by email and in the app.
When they pay by cash or check instead, open the invoice in `Billing` (web console) and
click **Mark paid**. It marks the whole invoice paid, because a part payment cannot be
recorded: mark it once all of the money has arrived. See
[Mark an invoice paid, void it, or refund it](https://www.aerscheduler.com/docs/billing/mark-an-invoice-paid-void-or-refund-it).

- **Billed to** must name somebody. A job billed to **Nobody** cannot be invoiced: choose who
  pays under **Details**.
- An owner who is not a member is reached only at the email on the aircraft's **Owners** panel,
  until they sign in: then the invoice reaches them at their own login, like a member. With
  neither, the invoice is refused until you add an address.
- **Findings the owner never heard about are named first.** A finding with charges that was never
  sent to the owner, answered or done is listed in an amber box, and the invoice is not raised
  until you tick **Bill them anyway**. Send it first, record the owner's answer, mark it done, or
  take its lines off if the owner should not pay for it yet.
- **So are findings still waiting on the owner's answer.** Once the job is invoiced the owner can
  no longer answer them, so they get an amber box of their own and the same tick. Record the
  owner's answer if they told you on the phone, mark them done, or take their lines off.
- What the owner declined or put off is listed under **Left off this bill**, with what it would
  have cost. It is not charged.
- If a line or a rate changed while the dialog was open, the invoice is not raised. The dialog
  shows the new total to check, and you raise it again. The same goes for the notes for the owner
  and the finished work: the owner is never sent text you did not see. The same happens if somebody added a line
  in the moment the invoice was being made: that invoice is voided at once, so the bill always
  matches the job.
- An invoice can be at most $999,999.99, and so can a line.

Once the invoice is raised, the job's lines and the owner's answers are frozen, the job cannot be
cancelled, and who pays cannot change. The owner's page shows the bill from then on: every line
on it, and nothing left for them to answer. To correct anything, void the invoice in
`Billing` (web console), change the lines, and raise a new one. The job's **Billing**
card links to its invoice, and the invoice links back to the job.

> **Careful:** Voiding the invoice does not let you delete the job. A bill happened, so the job stays on the
> record: set it to **Cancelled** if the work is not going ahead.

## Shop rates

**Who can do this:** Owners, Admins

`Settings → Shop rates` (web console) sets the **Labor rate per hour**, the **Markup on
parts**, and the **Markup on outside work** (a propeller overhaul, a radio repair sent out).
Markups are percentages: 15 adds 15% to what the shop paid.

These price NEW lines only. Each line keeps the rate and markup it was entered with, so changing
the shop's rates never changes a job already in progress. Only owners and admins see this page; a
technician sees the rate filled in on each labor line, and only an admin changes it there.

## Rates for a customer or a job

**Who can do this:** Owners, Admins

Some customers are charged differently: your own staff at cost, a fleet operator at an agreed
rate. Set it once instead of on every line.

- **For a customer:** on their page under `People` (web console), the **Rates** card,
  **Set rates**. Every new line on a job billed to them is priced at their labor rate and
  markups. Leave a field empty to use the shop's; 0% is at cost. It is not shown to the customer,
  and nobody can set their own.
- **For one job:** on the job's **Billing** card, click **Rates for new lines**. A job's own rate
  wins over the customer's; **Use the customer's** (or **Use the shop's**) clears it.

Each rate is taken from the nearest place that sets it: the job, then the customer billed, then
the shop. The card says which, for example "Dale Whitcomb's rate". Changing a rate on a job
with lines already on it offers to **Re-price** the lines priced at the old rate; a line priced by
hand or at a flat price keeps its price. Choose **Keep their prices** to leave them all.

## Find a job

- A technician's `Home` (web console) leads with **My jobs**: the open jobs you are
  on, in the job board's order, with the promised day (amber once it has passed). Click one to
  open it, or **Job board** for the rest. **Open a work order** and **Log a squawk** are under
  **Quick actions**, and **Maintenance queue** below lists open squawks and inspections overdue
  or coming due, worst first. The cards at the top count your jobs, open squawks and inspections
  due, and each opens the list it counts. A technician who also flies keeps their usual Home,
  with these underneath. The app's `Home` (mobile app) shows the same **My jobs**.
- `Maintenance → Open jobs` (web console) is the shop's job board. It groups the open
  jobs by where the aircraft is:
  **In the hangar**, **Waiting** (on the owner or a part), **Ready for pickup**, **Scheduled** and
  **Requested**, oldest first in each, with who pays, the technicians, the promised day (amber
  once it has passed) and what the job has charged so far. Click a column's name to sort by it,
  inside each group; click again to reverse it, and a third time to go back. Click a job to see it
  beside the list, or double-click it to open its page. **Finished jobs** lists completed and
  cancelled ones, newest first.
- The filter button beside the search narrows either list by **Assigned: To me**,
  **Aircraft**, **Location** (where the aircraft is based), **Owner** (anybody on the
  aircraft's Owners panel, billed or not), **Billed to**, and **Technician**. Each takes
  several at once. A technician's boards open on their own jobs; clear the filter to see
  everyone's.
- On an aircraft, `Work orders` (web console) shows its open jobs and its past ones.
- On a person in `People` (web console), **Work orders** lists the jobs billed to
  them, open first. It is always there for an aircraft owner who is not a member, and on a
  member once they have been billed for a job. Past the five most recent finished jobs, a link
  opens the rest on **Finished jobs**.
- Search with ⌘K for the job number (1042 or WO-1042), the tail, or the owner's name. Type
  `jobs:` first to search work orders only.

On the Aircraft page's **Customer aircraft** tab, each aircraft says **In the shop** while it has
an open job and is here, **Expected in** when its job is requested or scheduled, and **Not in
the shop** otherwise.

## Delete a job opened by mistake

An admin can delete a job from the menu on its page, as long as it has never been invoiced. A
job that has been invoiced stays on the record: set its stage to **Cancelled** instead. The
notifications about a deleted job go with it, the shop's and the owners'.
Deleting leaves a line in the audit log saying the job existed and who deleted it.

## Every change is recorded

Opening a job, changing its stage, editing it, adding or changing a line, recording the owner's
answer, and raising the invoice each leave a line in the audit log, naming the job, the aircraft
and the person billed. Admins can find them under `Audit log → Work orders` (web console).
Changing the shop's rates is recorded too, under `Audit log → Settings` (web console).

## Common questions

**Who can see work orders?**

Owners, admins and technicians. Dispatchers see customer aircraft on the schedule and the hangar bookings, but not the jobs. Instructors, students and renters never see them, even on your own aircraft, because a job carries the owner's details and prices.

**Can a work order bill two co-owners?**

No. One person pays for each job. It starts as the aircraft's owner marked Billed, and you can change it until the job is invoiced.

**Does the Hobbs I enter on a work order change the aircraft's meter?**

No. Hobbs and tach in and out are what the job recorded. The aircraft's own meters are changed where they always are, so nothing is grounded or rescheduled by typing a reading on a job.

**Can I delete a work order?**

An admin can delete a job opened by mistake, as long as it has never been invoiced. A job that has been invoiced stays on the record, even after its invoice is voided; set its stage to Cancelled instead.

**Can I change a line after the invoice is raised?**

Not on that invoice. Raising it freezes the job's lines. Void the invoice in Billing, change the lines, and raise a new one.

**Can I give a customer a discount?**

Yes. An admin puts a percentage in Discount on any line. It comes off the whole line before tax, and the invoice shows the line at its discounted price with the percentage in its name, at $0.00 if it is 100% off.

**Does the owner see my cost and markup on parts?**

No. The invoice shows each line's price and total. The cost and the markup stay on the work order, which only the shop sees.
