# AD 2026-22-12: Bell Textron Canada Limited Helicopters

> The FAA is superseding Airworthiness Directive (AD) 2022-20- 11, which applied to certain Bell Textron Canada Limited Model 429 helicopters. AD 2022-20-11 required visually inspecting the external surface of the tail rotor (TR) gearbox support assembly, borescope inspecting or visually inspecting the inside of the tail boom, and performing a tactile inspection. Depending on the results of the inspections, AD 2022-20-11 required removing certain rivets from service or repairing gaps in accordance with an approved method. Since the FAA issued AD 2022-20-11, the manufacturer determined the repetitive inspection interval needs to be reduced. This AD requires the same actions as AD 2022-20-11 and reduces the inspection interval. The FAA is issuing this AD to address the unsafe condition on these products.

Page: https://www.aerscheduler.com/airworthiness-directives/2026-22-12
Maker: Bell Textron Canada Limited
Product: Rotorcraft
Published: November 12, 2026
Effective: December 17, 2026
Amendment: 39-23514
Supersedes: 2022-20-11

## At a glance

Quoted from the FAA's summary of this AD. The full text below is what applies.

- What it requires: This AD requires the same actions as AD 2022-20-11 and reduces the inspection interval.
- Why: The FAA is issuing this AD to detect and correct failed rivets and rivets with inadequate grip length.
- Check an aircraft by N-number: https://www.aerscheduler.com/airworthiness-directives/check

## Applies to

This AD applies to Bell Textron Canada Limited Model 429 helicopters, certificated in any category, as identified in Transport Canada AD CF-2025-60R1, dated January 28, 2026 (Transport Canada AD CF-2025-60R1).

## What it requires

### Required Actions

Except as specified in paragraphs (h) and (i) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, Transport Canada AD CF-2025-60R1.

### Exceptions to Transport Canada AD CF-2025-60R1

  (1) Where Transport Canada AD CF-2025-60R1 refers to its effective date, this AD requires using the effective date of this AD.

  (2) Where Transport Canada AD CF-2025-60R1 requires compliance in terms of air time, this AD requires using hours time-in-service.

  (3) Where paragraphs (1), (2), and (3) of Part II of Transport Canada AD CF-2025-60R1 specify “since the last inspection in accordance with Part I or Part II of AD CF-2021-15 or Part I of this AD”, for this AD replace that text with “since the last inspection in accordance with Part I of this AD”.

  (4) Where the material referenced in Transport Canada AD CF-2025-60R1 specifies “tactile check”, this AD requires replacing that text with “tactile inspection”.

  (5) Where the material referenced in Transport Canada AD CF-2025-60R1 specifies to submit a structural repair request, this AD requires repairing any gaps and replacing rivets in accordance with a method approved by the Manager, International Validation Branch, FAA; or Transport Canada; or Bell Textron Canada Limited's Transport Canada Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature.

### No Reporting Requirement

Although the material referenced in Transport Canada AD CF-2025-60R1 specifies to submit certain information to the manufacturer, this AD does not include that requirement.

## Filed under

- [Bell Helicopter Textron](https://www.aerscheduler.com/airworthiness-directives/aircraft/bell-helicopter-textron)
- [Bell Helicopter Textron 429](https://www.aerscheduler.com/airworthiness-directives/aircraft/bell-helicopter-textron-429)

## Source

- The Federal Register document 2026-23007, the legal text: https://www.federalregister.gov/documents/2026/11/12/2026-23007/airworthiness-directives-bell-textron-canada-limited-helicopters
- Current status and corrections: the FAA's Dynamic Regulatory System, https://drs.faa.gov/

_Not the official record. Whether an AD applies to one aircraft depends on its serial number, installed equipment and records, and is a certificated mechanic's determination._
