# AD 2026-21-08: The Boeing Company Airplanes

> The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-700, -700C, -800, and -900ER series airplanes. This AD was prompted by a leak through the form-in- place (FiP) gasket at the engine fuel shutoff valve access panel found during a leak check. This AD requires a detailed inspection of the left- and right-side FiP gasket at the engine fuel shutoff valve access panel for correct sealant installation, a fluid leak test of the engine fuel shutoff valve access panels for any leak, and applicable on- condition actions. The FAA is issuing this AD to address the unsafe condition on these products.

Page: https://www.aerscheduler.com/airworthiness-directives/2026-21-08
Maker: The Boeing Company
Product: Airplane
Published: October 27, 2026
Effective: December 1, 2026
Amendment: 39-23497
Supersedes: nothing

## At a glance

Quoted from the FAA's summary of this AD. The full text below is what applies.

- What it requires: This AD requires a detailed inspection of the left- and right-side FiP gasket at the engine fuel shutoff valve access panel for correct sealant installation, a fluid leak test of the engine fuel shutoff valve access panels for any leak, and applicable on- condition actions.
- Why: The FAA is issuing this AD to address incorrect or missing sealant installation.
- Applies to: certain The Boeing Company Model 737-700, -700C, -800, and -900ER series airplanes
- Check an aircraft by N-number: https://www.aerscheduler.com/airworthiness-directives/check

## Applies to

This AD applies to The Boeing Company Model 737-700, -700C, -800, and -900ER series airplanes, certificated in any category, as identified in Boeing Alert Requirements Bulletin 737-57A1359 RB, Revision 1, dated June 25, 2026.

## What it requires

### Required Actions

Except as specified by paragraph (h) of this AD: At the applicable times specified in the “Compliance” paragraph of Boeing Alert Requirements Bulletin 737-57A1359 RB, Revision 1, dated June 25, 2026, do all applicable actions identified in, and in accordance with, the Accomplishment Instructions of Boeing Alert Requirements Bulletin 737-57A1359 RB, Revision 1, dated June 25, 2026.

> Note 1 to paragraph (g): Guidance for accomplishing the actions required by this AD can be found in Boeing Alert Service Bulletin 737-57A1359, Revision 1, dated June 25, 2026, which is referred to in Boeing Alert Requirements Bulletin 737-57A1359 RB, Revision 1, dated June 25, 2026.

### Exceptions to Requirements Bulletin Specifications

Where the Compliance Time columns of the tables in the “Compliance” paragraph of Boeing Alert Requirements Bulletin 737-57A1359 RB, Revision 1, dated June 25, 2026, refer to the original issue date of Requirements Bulletin 737-57A1359 RB, this AD requires using the effective date of this AD.

## Filed under

- [Boeing](https://www.aerscheduler.com/airworthiness-directives/aircraft/boeing)
- [Boeing 737-700](https://www.aerscheduler.com/airworthiness-directives/aircraft/boeing-737-700)

## Source

- The Federal Register document 2026-21862, the legal text: https://www.federalregister.gov/documents/2026/10/27/2026-21862/airworthiness-directives-the-boeing-company-airplanes
- Current status and corrections: the FAA's Dynamic Regulatory System, https://drs.faa.gov/

_Not the official record. Whether an AD applies to one aircraft depends on its serial number, installed equipment and records, and is a certificated mechanic's determination._
