# AD 2026-21-05: MD Helicopters, LLC Helicopters

> The FAA is adopting a new airworthiness directive (AD) for certain MD Helicopters, LLC (MDHI) Model 369D, 369E, 369F, 369FF, 369H, and 500N helicopters. This AD was prompted by a report of mechanical damage to the main transmission drive shaft coupling (coupling). This AD requires a one-time visual inspection of the couplings for cracks of the splines and, depending on the results, replacement of the couplings. The FAA is issuing this AD to address the unsafe condition on these products.

Page: https://www.aerscheduler.com/airworthiness-directives/2026-21-05
Maker: MD Helicopters, LLC
Product: Rotorcraft
Published: October 23, 2026
Effective: November 27, 2026
Amendment: 39-23494
Supersedes: nothing

## At a glance

Quoted from the FAA's summary of this AD. The full text below is what applies.

- What it requires: This AD requires a one-time visual inspection of the couplings for cracks of the splines and, depending on the results, replacement of the couplings.
- Why: The FAA is issuing this AD to detect and address couplings with damage to the root fillets, spline faces, and major diameter.
- Applies to: certain MD Helicopters, LLC (MDHI) Model 369D, 369E, 369F, 369FF, 369H, and 500N helicopters
- Check an aircraft by N-number: https://www.aerscheduler.com/airworthiness-directives/check

## Applies to

This AD applies to MD Helicopters, LLC (MDHI) Model 369D, 369E, 369F, 369FF, 369H, and 500N helicopters, certificated in any category, with an installed main transmission drive shaft coupling (coupling) part number 369H5660 with serial numbers 8564-0001 through 8564-0308.

## What it requires

### Required Actions

Within 50 hours time-in-service (TIS) or 6 months after the effective date of this AD, whichever occurs first, using a bright light and 10X magnification, visually inspect each coupling for cracks to the spline.

> Note 1 to paragraph (g): Examples of acceptable couplings with standard broaching tool marks and mechanical damage may be found in Figure 1 and Figure 2, as applicable, of MD Helicopters Service Bulletin SB369H-264R1, SB369D-230R1, SB369E-130R1, SB369F-121R1, and SB500N-067R1, dated May 26, 2023 (co-published as one document).

  (1) If any cracks are found on any coupling, before further flight, remove the affected coupling from service and replace with a serviceable coupling.

  (2) If there are no cracks on any coupling, within 300 hours TIS after the effective date of this AD, replace the affected coupling with a serviceable coupling.

## Filed under

- [Hughes](https://www.aerscheduler.com/airworthiness-directives/aircraft/hughes)
- [Hughes 369D](https://www.aerscheduler.com/airworthiness-directives/aircraft/hughes-369d)
- [Hughes 369E](https://www.aerscheduler.com/airworthiness-directives/aircraft/hughes-369e)
- [Hughes 369FF](https://www.aerscheduler.com/airworthiness-directives/aircraft/hughes-369ff)
- [Hughes 500N](https://www.aerscheduler.com/airworthiness-directives/aircraft/hughes-500n)

## Source

- The Federal Register document 2026-21664, the legal text: https://www.federalregister.gov/documents/2026/10/23/2026-21664/airworthiness-directives-md-helicopters-llc-helicopters
- Current status and corrections: the FAA's Dynamic Regulatory System, https://drs.faa.gov/

_Not the official record. Whether an AD applies to one aircraft depends on its serial number, installed equipment and records, and is a certificated mechanic's determination._
